New videos added monthly. New for 2015 will be more car shows and auto auctions for my members and visitors.
1970 Dodge Challenger SE in Sublime gree...
by James on February 1, 2015 at 6:33 PM
795 Views - 0 Comments
1970 Dodge Challenger SE, (special edition) restored from the ground up. Painted sublime green. The owner of this Challenger replaced the top along with floor, trunk, and other sheet metal parts.
I also got the opportunity to color sand the hood of this nicely restored Challenger.
Plastic Welding Kit, 80 watts welds plas...
by James on January 26, 2015 at 8:32 AM
845 Views - 1 Comment
See how I use this 80 watt Iron plastic welder to weld a crack in a Nissan bumper.
The welder was very simple and easy to use. This particular plastic welder was purchased at Harbor Freight in the state of Georgia.
Sandblasting Cabinet used for blasting l...
by James on October 27, 2014 at 7:01 PM
895 Views - 0 Comments
How to use a sandblasting cabinet correctly. I show you & explain how to put new braided hose's on the sandblasting gun and the pick-up tube. Also, I show different options you can purchase with a sandblasting cabinet.
I have had this sandblasting cabinet for well over 10 years. I currently am using glass beads as a blasting media. I have found that glass beads are one of my favorite blasting media for removing rust and baked-on debris from most car parts.
You are only limited to what you can blast in the cabinet from the door size on the cabinet. You can make your own sandblasting cabinet from 2x4's and plywood.
This video will show you how I made this blasting cabinet more efficient by caulking around everywhere the cabinet is joined together.
By caulking around the cabinet, it helps in making the cabinet air tight. Therefore, the media stays in the cabinet as you blast and keeps it from escaping from the cabinet.
Utility Trailer Finished
by James on October 9, 2014 at 10:05 PM
891 Views - 0 Comments
Last episode of the 5x10 utility trailer restored. Sanded, Primed, & Painted. This is the 3rd and last episode of a 5x10 utility trailer I restore to like new condition.
In this video I show the trailer after de-rusting, priming & painting the frame rails of the utility trailer.
5 x 10 Utility Trailer Restore. Primed &...
by James on October 9, 2014 at 9:56 PM
972 Views - 0 Comments
5x10 utility trailer is first inspected. Soon after inspection, trailer will be primed and painted. After an inspection of the work needed to get the trailer to like new condition.
First I take off the side planks from the utility trailer. I soon replace one of the pine floor planks.
Also the jack connected to the front of the trailer has to be straightened out before any other work is performed. Soon after I apply acid and other products to take care of the rusted areas of the trailer.
How to tack weld with a mig welder
by James on September 11, 2014 at 6:55 AM
943 Views - 0 Comments
In this video I demonstrate how to tack weld with a mig welder. I use a campbell Hausefeld welder.
This mig welder I use with argon gas. I find that welding with argon sheilding gas is a lot more efficent than welding with flux core wire.
25 - 36 of 54 Videos